How To Cut Crown Molding For Kitchen Cabinets

Its a best practice to cut crown moulding upside down on the miter saw.

How to cut crown molding for kitchen cabinets. Cut strips of straight 34-in x 1-12-in wood to fit the front and sides of each cabinet. Step 1 - Get the Dimension. As with crown molding on walls the trick to cutting the angles is to position to the trim upside-down and backward on the miter saw.

Here are the basics of how to cut cabinet crown molding effectively. Start with a side piece. Cut Crown Molding for Front of Cabinet Measure the length of the front piece of baseboard.

The saw can be adjusted to cut at any angle set it to 45 degrees for one side of a standard 90-degree corner. Step 1 Starting at an outside corner of the cabinets measure the span going to the right. Cut crown molding for kitchen cabinets it s a good idea to cut the corner angles first then measure the rest to fit.

Installing cabinet crown molding is a great way to add flair to a kitchen. Rotate the saw to a 45-degree miter setting and cut through the 34-in x 1-12. In the kitchen a clunky soffit dropped down a foot above the cabinets limiting them to 7 ft.

Measure the length of the front and sides of your cabinet. Take a piece of crown molding longer than the front of the cabinet and cut a 45-degree angle off one side. Cut the molding according to the measured length.

Hold the straight end against the wall and mark where the crown moulding exits the cabinet. Measure the sides of your cabinet and set the wood. I nailed the 12 molding to the blocks.